







RUTX12
This powerful dual LTE Cat 6 router is a great fit for mission-critical applications. Two cellular modems for dual simultaneous connections, seamless mobile service switching and load balancing features make this device irreplaceable in applications where losing connection is not an option.
MOBILE MODULE
The device supports 2 x 4G LTE Cat 6 up to 300 DL/50 UL Mbps; 3G up to 42 DL/5.76 UL Mbps.
3GPP RELEASE
Release 12.
ESIM
Consumer type eSIM with profile download and removal operations, supporting up to 7 eSIM profiles. Data plans are not included. Feature availability varies by order code.
SIM SWITCH
Supports dual SIM and eSIM with automatic switching. Switch triggers include weak signal, data limit, SMS limit, roaming, no network, network denied, data connection fail, and SIM idle protection. Feature availability varies by order code.
STATUS AND MONITORING
Status includes IMSI, ICCID, operator, operator state, data connection state, network type, CA indicator, bandwidth, connected band, signal strength (RSSI, SINR, RSRP, RSRQ, EC/IO, RSCP), data sent/received, LAC, TAC, cell ID, ARFCN, UARFCN, EARFCN, MCC, and MNC.
SMS
Features include SMS status, SMS configuration, email to SMS, SMS to email, SMS to HTTP, SMS to SMS, scheduled SMS, SMS auto-reply, and SMPP.
USSD
Supports sending and reading Unstructured Supplementary Service Data messages.
BLOCK/ALLOW LIST
Operator block or allow list by country or individual operators.
MULTIPLE PDN
Supports different PDNs for multiple network access and services.
BAND MANAGEMENT
Includes band lock and used band status display.
SIM IDLE PROTECTION SERVICE
Allows configuring the router to periodically switch to the unused SIM card and establish a data connection to prevent the SIM card from being blocked.
SIM PIN CODE MANAGEMENT
Enables setting, changing, or disabling the SIM card’s PIN.
APN
Auto APN support.
BRIDGE
Direct connection (bridge) between mobile ISP and device on LAN.
PASSTHROUGH
Router assigns its mobile WAN IP address to another device on LAN.
WIRELESS
Supports 802.11b/g/n/ac Wave 2 (Wi-Fi 5) with data transmission rates up to 867 Mbps (Dual Band, MU-MIMO), 802.11r fast transition, Access Point (AP), Station (STA).
WI-FI SECURITY
WPA2-Enterprise: PEAP, WPA2-PSK, WPA-EAP, WPA-PSK, WPA3-SAE, WPA3-EAP, OWE; AES-CCMP, TKIP, Auto-cipher modes, client separation, EAP-TLS with PKCS#12 certificates, disable auto-reconnect, 802.11w Protected Management Frames (PMF).
SSID/ESSID
SSID stealth mode and access control based on MAC address.
WI-FI USERS
Up to 150 simultaneous connections.
WIRELESS CONNECTIVITY FEATURES
Wireless mesh (802.11s), fast roaming (802.11r), Relayd, BSS transition management (802.11v), radio resource measurement (802.11k).
WIRELESS MAC FILTER
Allowlist, blocklist.
WIRELESS QR CODE GENERATOR
Scanned QR code automatically enters user into network without login.
TRAVELMATE
Forward Wi-Fi hotspot landing page to subsequent connected devices.
BLUETOOTH
Bluetooth 4.0, Bluetooth Low Energy (LE) for short range communication.
ETHERNET
WAN: 1 x WAN port 10/100/1000 Mbps, compliant with IEEE 802.3, 802.3u, 802.3az, supports auto MDI/MDIX crossover.
LAN: 4 x LAN ports, 10/100/1000 Mbps, compliant with IEEE 802.3, 802.3u, 802.3az, supports auto MDI/MDIX crossover.
NETWORK
Routing: Static routing, Dynamic routing (BGP, OSPF v2, RIP v1/v2, EIGRP, NHRP), Policy based routing.
Network protocols: TCP, UDP, IPv4, IPv6, ICMP, NTP, DNS, HTTP, HTTPS, SFTP, FTP, SMTP, SSL/TLS, ARP, VRRP, PPP, PPPoE, UPNP, SSH, DHCP, Telnet, SMPP, SNMP, MQTT, Wake On LAN (WOL), VXLAN.
VoIP passthrough support: H.323 and SIP-alg protocol NAT helpers.
Connection monitoring: Ping Reboot, Wget Reboot, Periodic Reboot, LCP and ICMP link inspection.
Firewall: Port forward, traffic rules, custom rules, TTL target customization.
Firewall status page: View all firewall statistics, rules, and rule counters.
Port management: View device ports, enable/disable, change transmission speed, auto-configuration.
Network topology: Visual representation of connected devices.
Hotspot: Captive portal, internal/external Radius server, Radius MAC authentication, SMS authorization, SSO authentication, internal/external landing page, walled garden, user scripts, URL parameters, user groups, individual or group limitations, 9 customizable themes, optional custom theme upload/download.
DHCP: Static/dynamic IP allocation, DHCP relay, server configuration, status, static leases with MAC wildcards.
QoS / SQM: Traffic priority queuing by source/destination, service, protocol, port, WMM, 802.11e.
DDNS: Supported by >77 service providers; manual configuration possible.
DNS over HTTPS: Secure DNS resolution over HTTPS.
Network backup: Wi-Fi WAN, Mobile, VRRP, Wired options with automatic failover.
Load balancing: Balance Internet traffic over multiple WAN connections.
SSHFS: Mount remote file system via SSH.
VRF support: Initial VRF support.
Traffic management: Real-time monitoring, wireless signal charts, traffic usage history.
SECURITY
802.1x: Port-based network access control client.
Authentication: Pre-shared key, digital certificates, X.509, TACACS+, internal/external RADIUS authentication, IP & login attempt block, time-based login blocking, built-in random password generator.
Firewall: Preconfigured rules via WebUI, unlimited configuration via CLI, DMZ, NAT, NAT-T, NAT64.
Attack prevention: DDOS (SYN flood, SSH, HTTP/HTTPS), port scan prevention (SYN-FIN, SYN-RST, X-mas, NULL flags, FIN scan attacks).
VLAN: Port and tag-based VLAN separation.
Mobile quota control: Mobile data limit, customizable period, start time, warning limit, phone number.
Web filter: Blacklist and whitelist.
Access control: Flexible access control for SSH, Web interface, CLI, Telnet.
TPM: Identification and authentication module, TPM 2.0 standard. Feature availability varies by order code.
Certificate manager: Create CA, server, client, let’s encrypt, SCEP certificates.
VPN
OpenVPN: Multiple clients/server simultaneously, 27 encryption methods.
IPsec: XFRM, IKEv1, IKEv2, 14 encryption methods (3DES, DES, AES128, AES192, AES256, AES128GCM8, AES192GCM8, AES256GCM8, AES128GCM12, AES192GCM12, AES256GCM12, AES128GCM16, AES192GCM16, AES256GCM16).
GRE: GRE tunnel, GRE over IPsec.
PPTP, L2TP: Client/server simultaneously, L2TPv3, L2TP over IPsec.
Stunnel: TLS encryption proxy.
DMVPN: Phase 2/3, dual hub support.
SSTP: Client instance support.
ZeroTier, WireGuard, Tinc, Tailscale: VPN client/server support with encryption, authentication, compression.
INDUSTRIAL PROTOCOLS
OPC UA: Client/Server, TCP connection.
MODBUS: Client/Server, TCP/USB, custom registers, 8/16/32-bit formats, HEX, ASCII.
DATA TO SERVER: HTTP(S), MQTT, Azure MQTT, custom LUA scripting.
MQTT Gateway: Modbus MQTT Gateway.
DNP3: Station, Outstation, TCP/USB.
DLMS/COSEM: Client, TCP/USB.
API: Teltonika Networks Web API (beta) support.
MONITORING & MANAGEMENT
Web UI: HTTP/HTTPS, status, configuration, firmware update, CLI, troubleshoot, multiple event log servers, event/system/kernel logs, Internet status.
FOTA: Firmware update from server, automatic notifications.
SSH: SSH v1/v2.
SMS: Status and configuration.
Call: Reboot, status, mobile data on/off, output on/off, answer/hang-up timer, Wi-Fi on/off.
TR-069: OpenACS, EasyCwmp, ACSLite, tGem, LibreACS, GenieACS, FreeACS, LibCWMP, Friendly tech, AVSystem.
MQTT: Broker and publisher.
SNMP: v1/v2/v3, traps, brute force protection.
JSON-RPC: Management API over HTTP/HTTPS.
RMS: Teltonika Remote Management System.
IoT Platforms: ThingWorx, Cumulocity, Azure IoT Hub, AWS IoT Core monitoring and actions.
SYSTEM CHARACTERISTICS
CPU: Quad-core ARM Cortex A7, 717 MHz.
RAM: 256 MB DDR3.
FLASH storage: 256 MB SPI Flash.
FIRMWARE / CONFIGURATION
Web UI: Firmware update from file, server check, configuration profiles, backup.
FOTA: Firmware update.
RMS: Firmware/config update for multiple devices.
Keep settings: Update without losing configuration.
Factory reset: Full reset restores all system settings, IP, PIN, user data.
FIRMWARE CUSTOMISATION
Operating system: RutOS (OpenWrt based).
Supported languages: Busybox shell, Lua, C, C++, Python, Java (package manager).
Development tools: SDK with build environment.
GPL customization: Create custom branded firmware/web pages.
Package manager: Install additional software on the device.
LOCATION TRACKING
GNSS: GPS, GLONASS, BeiDou, Galileo, QZSS.
Coordinates: Via WebUI, SMS, TAVL, RMS.
NMEA: NMEA 0183.
NTRIP: Networked Transport of RTCM via Internet Protocol.
Server software: TAVL, RMS.
Geofencing: Configurable multiple zones.
USB
Data rate: USB 2.0.
Applications: Samba share, USB-to-serial.
External devices: HDD, flash drive, modem, printer, USB-serial.
Storage formats: FAT, FAT32, exFAT, NTFS (read-only), ext2/3/4.
INPUT / OUTPUT
Input: 1 x Digital Input, 0–6 V low, 8–30 V high.
Output: 1 x Digital Output, Open collector, max 30 V, 300 mA.
Events: Email, RMS, SMS.
I/O juggler: Set I/O conditions to trigger events.
POWER
Connector: 4-pin industrial DC power socket.
Input voltage: 9–50 VDC, reverse polarity, surge protection.
PoE: Passive via LAN1, 9–50 VDC, Mode B, not IEEE802.3af/at/bt compatible.
Consumption: Idle <4 W, Max <22 W.
PHYSICAL INTERFACES
Ethernet: 5 x RJ45, 10/100/1000 Mbps.
I/Os: 1 x Digital Input, 1 x Digital Output.
LEDs: 4 x connection status, 6 x strength, 10 x Ethernet port, 4 x WAN, 1 x Power, 2 x 2.4G & 5G Wi-Fi.
SIM: 2 x SIM slots (Mini SIM 2FF), 1.8 V/3 V, external holders.
Antennas: 4 x SMA LTE, 2 x RP-SMA Wi-Fi, 1 x RP-SMA Bluetooth, 1 x SMA GNSS.
USB: 1 x USB A.
Reset: Reboot/User default/Factory reset button.
Other: 1 x grounding screw.
PHYSICAL SPECIFICATION
Casing: Full aluminium housing.
Dimensions (W x H x D): 132 x 44.2 x 95.1 mm.
Weight: 540 g.
Mounting: DIN rail, wall, flat surface (additional kit required).
OPERATING ENVIRONMENT
Temperature: -40 °C to 75 °C.
Humidity: 10%–90% non-condensing.
Ingress Protection: IP30.
REGULATORY & TYPE APPROVALS
Regulatory: CE, UKCA, EAC, UCRF, CITC, ANRT, ICASA, NOM, Anatel, RCM, SIRIM, NTC, NBTC, CB, E-mark.
EMC EMISSIONS & IMMUNITY
Standards: EN 55032:2015, EN 55035:2017, EN IEC 61000-3-2:2019, EN 61000-3-3:2013+A1:2019, EN 301 489-1 V2.2.3, EN 301 489-3 V2.1.1, EN 301 489-17 V3.2.4, EN 301 489-19 V2.1.1, Draft EN 301 489-52 V1.1.0.
ESD: EN 61000-4-2:2009.
Radiated Immunity: EN IEC 61000-4-3:2006 + A1:2008 + A2:2010.
EFT: EN 61000-4-4:2012.
Surge Immunity: EN 61000-4-5:2014 + A1:2017.
CS: EN 61000-4-6:2014.
DIP: EN 61000-4-11:2004 + A1:2017.
RF
Standards: EN 300 328 V2.2.2, EN 300 440 V2.2.1, EN 301 893 V2.1.1, EN 301 908-1 V13.1.1, EN 301 908-2 V13.1.1, EN 301 908-13 V13.1.1, EN 303 413 V1.1.1.
SAFETY
Standards: CE: EN IEC 62368-1:2020 + A11:2020, RCM: AS/NZS 62368.1:2018, CB: IEC 62368-1:2018.
High-Performance Industrial Cellular Routers
Carrier-grade throughput and low-latency routing for enterprise IoT, M2M telematics and critical connectivity.
Industrial-Grade Reliability & Durability
Rugged hardware and tested tolerance to extreme temperature, vibration and electrical noise for continuous operation.
Seamless Failover & Multi-WAN Connectivity
Dual SIM/eSIM, Ethernet redundancy and smart routing ensure uninterrupted service and automatic carrier failover.
Enterprise Security & Managed Network Support
Hardened firmware, VPN/MPLS support and professional managed services to protect data and simplify deployments.