ETHERNET
1 x LAN port, 10/100 Mbps, compliance with IEEE 802.3, IEEE 802.3u, 802.3az standards, supports auto MDI/MDIX crossover.
NETWORK
Network Protocols
Supports TCP, UDP, IPv4, IPv6, ICMP, NTP, DNS, HTTP, HTTPS, SSL/TLS, ARP, SSH, DHCP, SNMP, and MQTT.
Connection Monitoring
Includes Ping Reboot, Wget Reboot, and Periodic Reboot.
Network Topology
Provides a visual representation of your network, showing which devices are connected to which other devices.
DDNS
Supported by more than 77 service providers; others can be configured manually.
SECURITY
Authentication
Supports pre-shared key, digital certificates, X.509 certificates, TACACS+, internal and external RADIUS user authentication, IP and login attempts block, time-based login blocking, and a built-in random password generator.
WEB Filter
Supports blacklist for blocking unwanted websites and whitelist for specifying allowed sites only.
Access Control
Enables flexible access control of SSH, Web interface, CLI, and Telnet.
802.1x
Port-based network access control client.
NTP
Supported Modes
Server mode receives time from GPS and acts as a Stratum 1 NTP server to broadcast time to other devices, through UDP or over Serial (RS232, RS485).
Daytime Protocol
TCP/UDP.
Date over Serial
RS232/RS485.
NTP Features
Supports NTPv4, NTP authentication (MD5/SHA1), and Unicast/Multicast/Broadcast modes.
Protocol
NTP Stratum 1 Time Server (NTPv4).
NTP Accuracy
Ethernet NTP ±1 ms overall.
NTP Performance
Handles more than 300 NTP requests per second (wire speed).
Synchronization Accuracy
LAN synchronization typically 1–10 ms.
MODBUS
Supported Modes
Server and Client.
Supported Connection Types
RTU (RS232, RS485) and TCP.
Custom Registers
MODBUS TCP custom register block requests read/write to a file inside the router and can be used to extend MODBUS TCP Client functionality.
Supported Data Formats
8-bit: INT, UINT; 16-bit: INT, UINT (MSB or LSB first); 32-bit: float, INT, UINT (ABCD, DCBA, CDAB, BADC), HEX, ASCII.
MQTT Gateway
Allows sending commands and receiving data from MODBUS Server through MQTT broker.
API
Teltonika Networks Web API (beta) support enables configurable endpoints to retrieve or change data.
MONITORING & MANAGEMENT
WEB UI
HTTP/HTTPS interface for status, configuration, firmware update, CLI, troubleshooting, multiple event log servers, firmware update notifications, event log, system log, kernel log, and Internet status.
SSH
Supports SSH v1 and v2.
SNMP
Supports SNMP v1, v2, v3, SNMP Trap, and brute force protection.
JSON-RPC
Management API over HTTP/HTTPS.
MODBUS
Supports MODBUS TCP status and control.
SYSTEM CHARACTERISTICS
CPU
Mediatek, 580 MHz, MIPS 24KEc.
RAM
128 MB DDR2.
FLASH Storage
16 MB NOR Flash.
FIRMWARE / CONFIGURATION
WEB UI
Update firmware from file, check firmware on server, manage configuration profiles, and backup configuration.
Keep Settings
Update firmware without losing current configuration.
Factory Settings Reset
Restores all system settings including IP address, PIN, and user data to default manufacturer configuration.
FIRMWARE CUSTOMISATION
Operating System
RutOS (OpenWrt-based Linux OS).
Supported Languages
Busybox shell (ash), Lua 5.1, C, C++.
Development Tools
SDK package with build environment provided.
GPL Customization
Allows creation of custom branded firmware and web page applications by modifying colors, logos, and other elements.
TIME SYNCHRONIZATION
Acquisition Sensitivity
Acquisition Sensitivity -146 dBm, Reacquisition Sensitivity -157 dBm, Tracking Sensitivity -157 dBm.
Time Source
GPS 1575.42 ±1.023 MHz, GLONASS 1597.5–1605.8 MHz, Galileo 1575.42 ±2.046 MHz, BDS 1561.098 ±2.046 MHz.
Startup
Cold GPS acquisition in less than 120 seconds.
SERIAL
RS232
Terminal block connector: TX, RX, RTS, CTS.
RS485
Terminal block connector: D+, D-, R+, R- (2 or 4 wire interface).
INPUT / OUTPUT
Input
3 x Digital Input, 0–6 V detected as logic low, 8–30 V detected as logic high.
Output
3 x Digital Output, Open collector output, max 30 V, 300 mA.
POWER
Connector
2-pin in 16-pin industrial terminal block.
Input Voltage Range
9–30 VDC, overvoltage protection, reverse polarity protection, surge protection ±1 kV 50 μs max.
Power Consumption
Idle: < 2 W, Max: < 3.5 W.
PHYSICAL INTERFACES
Ethernet
1 x RJ45 port, 10/100 Mbps.
I/Os
3 x configurable I/O, 1 x analog input in 16-pin terminal block.
Status LEDs
1 x Power, 2 x GNSS status LEDs, 1 x NTP Server status LED, 3 x I/O status LEDs.
Power
1 x 16-pin terminal block.
Antennas
1 x SMA for GNSS.
RS232
4-pin in 16-pin terminal block (TX, RX, RTS, CTS).
RS485
4-pin in 16-pin terminal block (D+, D-, R+, R-).
Reset
Reboot/User default reset/Factory reset button.
PHYSICAL SPECIFICATION
Casing Material
Anodized aluminum housing and panels.
Dimensions (W x H x D)
82.6 x 25 x 83 mm.
Weight
180 g.
Mounting Options
DIN rail, wall mount, flat surface (all require additional kit).
OPERATING ENVIRONMENT
Operating Temperature
-40 °C to 75 °C.
Operating Humidity
10% to 90% non-condensing.
Ingress Protection Rating
IP30.
REGULATORY & TYPE APPROVALS
Regulatory
CE, UKCA, CB, UCRF, EAC, WEEE.
