ionarix.com

RUT361

The RUT361 is a robust cellular router with speeds of up to 300 Mbps with carrier aggregation, vital for IoT solutions demanding uninterrupted networks in challenging environments. Remote monitoring, advanced security features, and WAN failover make this LTE Cat 6 router feature-rich, and two Wi-Fi antennas ensure greater device applicability in diverse M2M applications.

Technical Features

MOBILE MODULE
The device supports 4G LTE Cat 6 with download speeds up to 300 Mbps and upload speeds up to 50 Mbps. 3G connectivity offers 42 Mbps downlink and 5.76 Mbps uplink.

3GPP RELEASE
Release 12.

STATUS AND MONITORING
Status reporting includes IMSI, ICCID, operator, operator state, data connection state, network type, CA indicator, bandwidth, connected band, signal strength (RSSI, SINR, RSRP, RSRQ, EC/IO, RSCP), data sent/received, LAC, TAC, cell ID, ARFCN, UARFCN, EARFCN, MCC, and MNC.

SMS
SMS status, SMS configuration, EMAIL to SMS, SMS to EMAIL, SMS to HTTP, SMS to SMS, scheduled SMS, SMS autoreply, SMPP.

USSD
Supports sending and reading Unstructured Supplementary Service Data messages.

BLOCK / ALLOW LIST
Operator block or allow list by country or separate operators.

MULTIPLE PDN
Supports using different PDNs for multiple network access and services.

BAND MANAGEMENT
Band lock and used band status display.

SIM PIN CODE MANAGEMENT
Enables setting, changing, or disabling the SIM card’s PIN.

APN
Auto APN configuration.

BRIDGE AND PASSTHROUGH
Bridge provides a direct connection between the mobile ISP and a device on LAN. Passthrough mode assigns the mobile WAN IP address to another LAN device.

WIRELESS

Wireless Mode
802.11b/g/n (Wi-Fi 4), 2×2 MIMO, Access Point (AP), Station (STA).

Wi-Fi Security
WPA2-Enterprise: PEAP, WPA2-PSK, WPA-EAP, WPA-PSK, WPA3-SAE, WPA3-EAP, OWE; AES-CCMP, TKIP, auto-cipher modes, client separation, EAP-TLS with PKCS#12 certificates, disable auto-reconnect, 802.11w Protected Management Frames (PMF).

SSID / ESSID
SSID stealth mode and access control based on MAC address.

Wi-Fi Users
Supports up to 50 simultaneous connections.

Wireless Connectivity Features
Wireless mesh (802.11s), fast roaming (802.11r), BSS transition management (802.11v), radio resource measurement (802.11k).

Wireless MAC Filter
Allowlist and blocklist options.

Wireless QR Code Generator
Generates a QR code for automatic network access without login.

TravelMate
Forwards Wi-Fi hotspot landing pages to subsequent connected devices.

ETHERNET

WAN
1 x WAN port 10/100 Mbps, compliant with IEEE 802.3, 802.3u, 802.3az standards, supports auto MDI/MDIX.

LAN
1 x LAN port 10/100 Mbps, compliant with IEEE 802.3, 802.3u, 802.3az standards, supports auto MDI/MDIX.

NETWORK

Routing
Supports static routing and dynamic routing (BGP, OSPF v2, RIP v1/v2, EIGRP, NHRP), including policy-based routing.

Network Protocols
TCP, UDP, IPv4, IPv6, ICMP, NTP, DNS, HTTP, HTTPS, SFTP, FTP, SMTP, SSL/TLS, ARP, VRRP, PPP, PPPoE, UPnP, SSH, DHCP, Telnet, SMPP, SNMP, MQTT, Wake On LAN (WOL), VXLAN.

VoIP Passthrough Support
H.323 and SIP-ALG NAT helpers for proper routing of VoIP packets.

Connection Monitoring
Ping reboot, wget reboot, periodic reboot, LCP and ICMP link inspection.

Firewall
Supports port forwarding, traffic rules, custom rules, TTL target customization.

Firewall Status Page
View all firewall statistics, rules, and counters.

Port Management
Enables/disables device ports, auto-configuration, and transmission speed adjustments.

Network Topology
Provides a visual representation of connected devices.

DHCP
Supports static and dynamic IP allocation, DHCP relay, server configuration, status monitoring, and static leases with MAC wildcards.

QoS / Smart Queue Management (SQM)
Traffic priority queuing by source, destination, service, protocol, or port. Supports WMM and 802.11e.

DDNS
Supports more than 77 service providers, with manual configuration for others.

DNS Over HTTPS
Enables secure DNS resolution via HTTPS.

Network Backup
Supports VRRP, wired options, Wi-Fi WAN, and mobile, each usable as automatic failover.

Load Balancing
Balances Internet traffic over multiple WAN connections.

Hotspot
Captive portal with internal/external Radius server, Radius MAC authentication, SMS authorization, SSO authentication, internal/external landing pages, walled garden, user scripts, URL parameters, user groups, individual/group limitations, user management, nine default themes with optional custom themes.

SSHFS
Supports mounting remote file systems via SSH.

Traffic Management
Provides real-time monitoring, wireless signal charts, and traffic usage history.

SECURITY

Authentication
Pre-shared key, digital certificates, X.509 certificates, TACACS+, internal/external RADIUS, IP/login attempt block, time-based login restrictions, built-in random password generator.

Firewall (Advanced)
Preconfigured rules via WebUI and unlimited configuration via CLI. Supports DMZ, NAT, NAT-T, NAT64.

Attack Prevention
DDoS protection (SYN flood, SSH, HTTP/HTTPS), port scan prevention (SYN-FIN, SYN-RST, Xmas, NULL, FIN).

VLAN
Port and tag-based VLAN separation.

Mobile Quota Control
Customizable mobile data limits with period, start time, warning threshold, and phone number association.

Web Filter
Blacklist and whitelist website access control.

Access Control
Flexible control of SSH, web interface, CLI, and Telnet.

Certificate Manager
Creates CA, server, client, Let’s Encrypt, and SCEP certificates.

802.1x
Port-based network access control server.

VPN

OpenVPN
Multiple clients and server simultaneously, supports 27 encryption methods.

OpenVPN Encryption
DES-CBC 64, RC2-CBC 128, DES-EDE-CBC 128, DES-EDE3-CBC 192, DESX-CBC 192, BF-CBC 128, RC2-40-CBC 40, CAST5-CBC 128, RC2-64-CBC 64, AES-128-CBC 128, AES-128-CFB 128, AES-128-CFB1 128, AES-128-CFB8 128, AES-128-OFB 128, AES-128-GCM 128, AES-192-CFB 192, AES-192-CFB1 192, AES-192-CFB8 192, AES-192-OFB 192, AES-192-GCM 192, AES-256-GCM 256, AES-256-CFB 256, AES-256-CFB1 256, AES-256-CFB8 256, AES-256-OFB 256, AES-256-CBC 256.

IPsec
XFRM, IKEv1, IKEv2 with 14 encryption methods (3DES, DES, AES128, AES192, AES256, AES128GCM8, AES192GCM8, AES256GCM8, AES128GCM12, AES192GCM12, AES256GCM12, AES128GCM16, AES192GCM16, AES256GCM16).

GRE
Supports GRE tunnel and GRE over IPsec.

PPTP / L2TP
Client/server instances simultaneously, L2TPv3, L2TP over IPsec.

Stunnel
TLS encryption proxy for existing clients/servers without code changes.

DMVPN
Supports scalable IPsec VPNs with Phase 2/3 and dual hub support.

SSTP
SSTP client instance support.

ZeroTier
VPN client support.

WireGuard
VPN client and server support.

Tinc
Provides encryption, authentication, and compression in tunnels.

Tailscale
Encrypted point-to-point connections using WireGuard protocol.

INDUSTRIAL PROTOCOLS

OPC UA
Modes: Client, Server. Connection type: TCP.

MODBUS
Modes: Server, Client. Connection type: TCP. Custom registers for extended functionality. Supported data formats: 8-bit INT/UINT, 16-bit INT/UINT (MSB/LSB), 32-bit float/INT/UINT (ABCD, DCBA, CDAB, BADC), HEX, ASCII.

DATA TO SERVER
Protocols: HTTP(S), MQTT, Azure MQTT. Extracts parameters from multiple sources and sends to a single server. Custom LUA scripting supported.

MQTT Gateway
Modbus MQTT Gateway for sending commands and receiving data from MODBUS server.

DNP3
Modes: Station, Outstation. Connection: TCP.

DLMS / COSEM
DLMS client support over TCP.

API
Teltonika Networks Web API (beta) for data retrieval and control. Documentation: https://developers.teltonika-networks.com

MONITORING & MANAGEMENT
WEB UI: HTTP/HTTPS, status, configuration, firmware update, CLI, troubleshooting, multiple event log servers, system/kernel logs, Internet status.
FOTA: Firmware update from server, automatic notification.
SSH: v1, v2.
SMS: Status and configuration.
Call: Reboot, mobile data on/off, output on/off, answer/hang-up, Wi-Fi on/off.
TR-069: OpenACS, EasyCwmp, ACSLite, tGem, LibreACS, GenieACS, FreeACS, LibCWMP, Friendly tech, AVSystem.
MQTT: Broker and publisher.
SNMP: v1/v2/v3, trap, brute-force protection.
JSON-RPC: API over HTTP/HTTPS.
MODBUS: TCP status/control.
RMS: Teltonika Remote Management System.

IoT PLATFORMS
ThingWorx, Cumulocity, Azure IoT Hub, AWS IoT Core — supports monitoring, device management, firmware updates, and direct method calls.

SYSTEM CHARACTERISTICS
CPU: Mediatek 580 MHz, MIPS 24KEc. RAM: 128 MB DDR2. FLASH: 16 MB serial NOR.

FIRMWARE / CONFIGURATION
WEB UI: Firmware updates, configuration profiles, backups.
FOTA: Update FW. RMS: Update FW/config for multiple devices.
Keep settings: Update FW without losing current config.
Factory reset: Restores all system settings to default.

FIRMWARE CUSTOMISATION
OS: RutOS (OpenWrt-based). Languages: Busybox shell, Lua, C, C++. SDK package, GPL customization, package manager support.

INPUT / OUTPUT
Inputs: Up to 2 configurable digital inputs, 0–6 V logic low, 8–30 V logic high.
Outputs: Up to 2 configurable digital outputs, open collector, max 30 V, 300 mA.
Events: Email, RMS, SMS. I/O juggler supports conditional events.

POWER
Connector: 4-pin industrial DC socket. Input: 9–30 VDC, reverse polarity and surge protection. Passive PoE optional. Idle <2.4 W, Max <4.7 W.

PHYSICAL INTERFACES
Ethernet: 2 x RJ45 10/100 Mbps. I/Os: 2 configurable digital I/O on power connector. LEDs: 2 mobile type, 3 mobile strength, 2 Ethernet, 1 power. SIM: 1 Mini SIM slot. Antennas: 2 SMA LTE, 2 RP-SMA Wi-Fi. Reset button included.

PHYSICAL SPECIFICATION
Casing: Aluminium. Dimensions: 100 x 30 x 85 mm. Weight: 243 g. Mounting: DIN rail, wall mount, flat surface.

OPERATING ENVIRONMENT
Temperature: -40 °C to 75 °C. Humidity: 10–90% non-condensing. IP rating: IP30.

REGULATORY & TYPE APPROVALS
Regulatory: CE, UKCA, FCC, IC, RCM, CB, WEEE, RoHS, REACH. Operator: PTCRB, AT&T, Verizon.

EMC EMISSIONS & IMMUNITY
Standards: EN 55032:2015 + A11:2020 + A1:2020, EN 55035:2017 + A11:2020, EN IEC 61000-3-2:2019 + A1:2021, EN 61000-3-3:2013 + A1:2019 + A2:2021, EN 301 489-1 V2.2.3, EN 301 489-17 V3.2.4, EN 301 489-52 V1.2.1. ESD: EN 61000-4-2:2009. Radiated Immunity: EN IEC 61000-4-3:2020. EFT: EN 61000-4-4:2012. Surge Immunity (AC mains): EN 61000-4-5:2014 + A1:2017. CS: EN 61000-4-6:2014. DIP: EN IEC 61000-4-11:2020.

RF STANDARDS
EN 300 328 V2.2.2, EN 301 908-1 V15.2.1, EN 301 908-2 V13.1.1, EN 301 908-13 V13.2.1.

SAFETY STANDARDS
CE: EN 62368-1:2014 + A11:2017, EN IEC 62232:2017, EN 50385:2017. RCM: AS/NZS 62368.1:2018. CB: IEC 62368-1:2018.

SAFETY (ORDINARY LOCATIONS)
CE: EN IEC 62368-1:2020 + A11:2020, EN IEC 62311:2020, EN 50665:2017. RCM: AS/NZS 62368.1:2022. CB: IEC 62368-1:2018.

High-Performance Industrial Cellular Routers

Carrier-grade throughput and low-latency routing for enterprise IoT, M2M telematics and critical connectivity.

Industrial-Grade Reliability & Durability

Rugged hardware and tested tolerance to extreme temperature, vibration and electrical noise for continuous operation.

Seamless Failover & Multi-WAN Connectivity

Dual SIM/eSIM, Ethernet redundancy and smart routing ensure uninterrupted service and automatic carrier failover.

Enterprise Security & Managed Network Support

Hardened firmware, VPN/MPLS support and professional managed services to protect data and simplify deployments.

Related Products

RUT140

RUT140 The RUT140 is a compact industrial Ethernet router, enhancing...

OTD500

OTD500 The OTD500 is a durable 5G outdoor router built...

OTD140

OTD140 The OTD140 outdoor router features a dedicated and durable...

ATRM50

ATRM50 The ATRM50 is a rugged 5G router built for...

Join the

Request a Quote Or Technical Query

Ionarix.sales@gmail.com

Contact us