MOBILE MODULE
4G LTE Cat 4 up to 150 DL/50 UL Mbps; 3G up to 21 DL/5.76 UL Mbps; 2G up to 236.8 DL/236.8 UL kbps.

3GPP RELEASE
Release 9.

STATUS
IMSI, ICCID, operator, operator state, data connection state, network type, bandwidth, connected band, signal strength (RSSI), SINR, RSRP, RSRQ, EC/IO, RSCP, data sent/received, LAC, TAC, cell ID, ARFCN, UARFCN, EARFCN, MCC, and MNC.

SMS
SMS status, SMS configuration, EMAIL to SMS, SMS to EMAIL, SMS to HTTP, SMS to SMS, scheduled SMS, SMS autoreply, SMPP.

USSD
Supports sending and reading Unstructured Supplementary Service Data messages.

BLOCK/ALLOW LIST
Operator block/allow list (by country or separate operators).

MULTIPLE PDN
Possibility to use different PDNs for multiple network access and services.

BAND MANAGEMENT
Band lock, used band status display.

SIM IDLE PROTECTION SERVICE
Provides the possibility to configure the router to periodically switch to the unused SIM card and establish a data connection to prevent the SIM card from being blocked.

SIM PIN CODE MANAGEMENT
Enables setting, changing, or disabling the SIM card’s PIN.

APN
Auto APN configuration supported.

BRIDGE
Direct connection (bridge) between mobile ISP and device on LAN.

PASSTHROUGH
Router assigns its mobile WAN IP address to another device on LAN.

WIRELESS

Wireless Mode
802.11b/g/n (Wi-Fi 4), Access Point (AP), Station (STA).

Wi-Fi Security
WPA2-Enterprise (PEAP), WPA2-PSK, WPA-EAP, WPA-PSK, WPA3-SAE, WPA3-EAP, OWE; AES-CCMP, TKIP, auto-cipher modes, client separation, EAP-TLS with PKCS#12 certificates, disable auto-reconnect, 802.11w Protected Management Frames (PMF).

SSID/ESSID
SSID stealth mode and access control based on MAC address.

Wi-Fi Users
Up to 100 simultaneous connections.

Wireless Connectivity Features
Wireless mesh (802.11s), fast roaming (802.11r), Relayd, BSS transition management (802.11v), radio resource measurement (802.11k).

Wireless MAC Filter
Allowlist, blocklist.

Wireless QR Code Generator
Once scanned, a user will automatically enter your network without needing to input login information.

TravelMate
Forward Wi-Fi hotspot landing page to a subsequent connected device.

ETHERNET

WAN
1 x WAN port 10/100 Mbps, compliance IEEE 802.3, IEEE 802.3u, 802.3az standards, supports auto MDI/MDIX.

LAN
3 x LAN ports, 10/100 Mbps, compliance IEEE 802.3, IEEE 802.3u standards, supports auto MDI/MDIX.

NETWORK

Routing
Static routing, Dynamic routing (BGP, OSPF v2, RIP v1/v2, EIGRP, NHRP), Policy-based routing.

Network Protocols
TCP, UDP, IPv4, IPv6, ICMP, NTP, DNS, HTTP, HTTPS, SFTP, FTP, SMTP, SSL/TLS, ARP, VRRP, PPP, PPPoE, UPnP, SSH, DHCP, Telnet, SMPP, SNMP, MQTT, Wake on LAN (WOL), VXLAN.

VoIP Passthrough Support
H.323 and SIP-ALG protocol NAT helpers, allowing proper routing of VoIP packets.

Connection Monitoring
Ping Reboot, Wget Reboot, Periodic Reboot, LCP and ICMP for link inspection.

Firewall
Port forward, traffic rules, custom rules, TTL target customization.

Firewall Status Page
View all your Firewall statistics, rules, and rule counters.

Port Management
View device ports, enable and disable each of them, turn auto-configuration on or off, change their transmission speed, and more.

Network Topology
Visual representation of your network, showing which devices are connected to which other devices.

Hotspot
Captive portal (hotspot), internal/external Radius server, Radius MAC authentication, SMS authorization, SSO authentication, internal/external landing page, walled garden, user scripts, URL parameters, user groups, individual user or group limitations, 9 default customizable themes and optionality to upload and download customized hotspot themes.

DHCP
Static and dynamic IP allocation, DHCP relay, DHCP server configuration, status, static leases with MAC wildcards.

QoS / Smart Queue Management (SQM)
Traffic priority queuing by source/destination, service, protocol, or port, WMM, 802.11e.

DDNS
Supported >77 service providers; others can be configured manually.

DNS over HTTPS
DNS over HTTPS proxy enables secure DNS resolution by routing DNS queries over HTTPS.

Network Backup
Wi-Fi WAN, Mobile, VRRP, Wired options, each of which can be used as an automatic failover.

Load Balancing
Balance Internet traffic over multiple WAN connections.

SSHFS
Possibility to mount remote file system via SSH protocol (not available in standard firmware).

Traffic Management
Real-time monitoring, wireless signal charts, traffic usage history.

Port Mirroring
Mirroring network traffic on Ethernet ports for monitoring and analysis.

SECURITY

Authentication
Pre-shared key, digital certificates, X.509 certificates, TACACS+, internal & external RADIUS users authentication, IP & login attempts block, time-based login blocking, built-in random password generator.

Firewall (Advanced)
Preconfigured firewall rules can be enabled via WebUI, unlimited firewall configuration via CLI, DMZ, NAT, NAT-T, NAT64.

Attack Prevention
DDOS prevention (SYN flood protection, SSH attack prevention, HTTP/HTTPS attack prevention), port scan prevention (SYN-FIN, SYN-RST, Xmas, NULL flags, FIN scan attacks).

VLAN
Port and tag-based VLAN separation.

Mobile Quota Control
Mobile data limit, customizable period, start time, warning limit, phone number.

WEB Filter
Blacklist for blocking unwanted websites; whitelist for specifying allowed sites only.

Access Control
Flexible access control for SSH, Web interface, CLI, and Telnet.

Certificate Manager
Certificate creation tool allows creating CA, server, client, Let’s Encrypt, SCEP certificates.

VPN

OpenVPN
Multiple clients and a server can run simultaneously, supporting 27 encryption methods.

IPsec
XFRM, IKEv1, IKEv2, with 14 encryption methods for IPsec (3DES, DES, AES128, AES192, AES256, AES128GCM8, AES192GCM8, AES256GCM8, AES128GCM12, AES192GCM12, AES256GCM12, AES128GCM16, AES192GCM16, AES256GCM16).

GRE
GRE tunnel, GRE tunnel over IPsec support.

PPTP, L2TP
Client/Server instances can run simultaneously; L2TPv3 and L2TP over IPsec supported.

Stunnel
Proxy designed to add TLS encryption functionality to existing clients and servers without changing the program code.

DMVPN
Supports scalable IPsec VPNs, Phase 2 and Phase 3, Dual Hub support.

SSTP, ZeroTier, WireGuard, Tinc
Supports respective VPN client and server configurations.

INDUSTRIAL PROTOCOLS

MODBUS
Supported modes: Server, Client.
Connection type: TCP.
Custom registers: MODBUS TCP custom register block requests to read/write inside router.
Supported data formats: 8-bit (INT, UINT), 16-bit (INT, UINT), 32-bit (float, INT, UINT), HEX, ASCII.

DATA TO SERVER
Protocol: HTTP(S), MQTT, Azure MQTT.
Data aggregation from multiple sources, custom LUA scripting supported.

MQTT Gateway
Modbus MQTT Gateway allows sending commands and receiving data from MODBUS server through MQTT broker.

DNP3
Supported modes: Station, Outstation.
Connection: TCP.

DLMS/COSEM
Supported mode: Client.
Connection type: TCP.

API
Teltonika Networks Web API (beta) for configurable endpoints: https://developers.teltonika-networks.com

MONITORING & MANAGEMENT

WEB UI
HTTP/HTTPS, status, configuration, FW update, CLI, troubleshooting, multiple event log servers, firmware update notifications, event log, system log, kernel log, Internet status.

FOTA
Firmware update from server with automatic notification.

SSH
SSH (v1, v2).

SMS
SMS status, configuration.

Call Control
Reboot, status, mobile data on/off, output on/off, answer/hang-up with timer, Wi-Fi on/off.

TR-069
Supports OpenACS, EasyCwmp, ACSLite, tGem, LibreACS, GenieACS, FreeACS, LibCWMP, Friendly tech, AVSystem.

MQTT / SNMP / JSON-RPC
MQTT Broker, MQTT publisher; SNMP v1/v2/v3, SNMP Trap, brute force protection; JSON-RPC Management API over HTTP/HTTPS.

RMS
Teltonika Remote Management System.

IoT Platforms
ThingWorx, Cumulocity, Azure IoT Hub, AWS IoT Core support with monitoring, reboot, firmware updates, and API calls.

SYSTEM CHARACTERISTICS

CPU
Mediatek 580 MHz, MIPS 24KEc.

RAM
128 MB DDR2.

FLASH Storage
16 MB SPI Flash.

Firmware / Configuration
Web UI, FOTA, RMS, configuration backup, factory reset, RutOS (OpenWrt-based Linux OS), SDK support, GPL customization, Package Manager.

INPUT / OUTPUT
1 x Digital Input (0–6 V low, 8–30 V high), 1 x Digital Output (open collector, max 30 V, 300 mA). Event triggers: Email, RMS, SMS. I/O juggler supported.

POWER
4-pin industrial DC socket, input 9–30 VDC, reverse polarity and surge protection. Passive PoE via LAN1 (9–30 VDC). Power consumption <2 W idle, <7 W max.

PHYSICAL INTERFACES
4 x RJ45 Ethernet (10/100 Mbps), 1 x Digital Input, 1 x Digital Output, SIM slots, power connector, LTE/Wi-Fi antenna connectors, reset button, status LEDs.

PHYSICAL SPECIFICATIONS
Aluminium housing, plastic panels, dimensions 110 x 50 x 100 mm, weight 297 g. Mounting: DIN rail, wall, flat surface. Operating temp: -40 °C to 75 °C, humidity: 10–90% non-condensing, IP30.

REGULATORY & TYPE APPROVALS
CE, UKCA, IMDA, Anatel, RCM, E-mark, ECE R118, CB, RoHS, REACH, NCC.

EMC EMISSIONS & IMMUNITY STANDARDS
EN 55032:2015 + A11:2020 + A1:2020
EN 55035:2017 + A11:2020
EN IEC 61000-3-2:2019 + A1:2021
EN 61000-3-3:2013 + A1:2019 + A2:2021
EN 301 489-1 V2.2.3
EN 301 489-17 V3.2.4
EN 301 489-52 V1.2.1
ESD: EN 61000-4-2:2009
Radiated Immunity: EN IEC 61000-4-3:2020
EFT: EN 61000-4-4:2012
Surge Immunity (AC Mains Power Port): EN 61000-4-5:2014 + A1:2017
CS: EN 61000-4-6:2014
DIP: EN 61000-4-11:2020

RF STANDARDS
EN 301 908-1;
EN 301 908-2;
EN 301 908-13;
EN 300 328;